{"title":"GKTech","description":"","products":[{"product_id":"s145-bash","title":"GKTech - S14 240sx\/S15 Silvia Under Engine Skid Plate - S145-bash","description":"\u003cp\u003eSave your sump and K frame with this under engine skid plate. This is designed with low cars in mind and will reduce the risk of damage. It will also help reduce turbulence and improve airflow.\u003cbr\u003e\u003cbr\u003e- 3.0mm thick aluminium \u003cbr\u003e- 100% perfect fitment \u003cbr\u003e- Fits S14 240sx and S15 Silvia \u003c\/p\u003e\n\u003cb\u003eDo you sell skid plates for other cars?\u003c\/b\u003e\nWe only sell the products listed on our website. If it's not listed on here, then we don't sell it. We don't do any custom work. Sorry.\n\n\u003cb\u003eWill this skid plate fit with my aftermarket sump?\u003c\/b\u003e\nProviding that your sump doesn’t sit below the K frame then this skid plate will fit.\n\n\u003cb\u003eWill this skid plate fit with my aftermarket swaybar?\u003c\/b\u003e\nProviding that your swaybar doesn’t sit higher than the level of the K frame (which is the line that the skid plate follows) then you’ll be fine. Almost all swaybars sit below the level of the K frame however please check your vehicle before purchasing.\n\n\u003cb\u003eI’m running a different engine in my car, will this skid plate fit?\u003c\/b\u003e\nProviding that your sump doesn’t sit below the K frame and that you’re running the standard K frame meant for the vehicle that you’re buying the skid plate for, then this skid plate will fit.\n\n\u003cb\u003eDo I need to modify anything for the skid plate to fit?\u003c\/b\u003e\nThere shouldn’t be any need for anything to be modified to fit the skid plate. If you’re running an aftermarket intercooler then the brackets for that may bolt up to the lower radiator support and may get in the way but this can easily be resolved by using the skid plate as the mounting point.\n\n\u003cb\u003eWill I still be able to drain the oil from my sump with the skid plate fitted?\u003c\/b\u003e\nYes, the skid plate has a provision for the stock oil drain position. If you’re running an aftermarket sump it may be in a different position to the standard oil drain. Unfortunately it’s not possible to cater for everyone and if you’re using an aftermarket sump, please take this into consideration.\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ebWBXnb_Ayg\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815223464247,"sku":"S145-bash","price":328.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/2015-10-14_15.47.45.jpg?v=1752084100"},{"product_id":"slid-gbox","title":"GKTech - Billet aluminum solid transmission mount - SLID-GBOX","description":"\u003cp\u003eThe GKTECH solid transmission mount is a direct replacement of the standard item and drastically increases the feel of the transmission. \u003cbr\u003e\u003cbr\u003e- CNC Machined from 6061-T6 billet aluminum and anodized black \u003cbr\u003e- Includes all fittings required for a direct install\u003cbr\u003e- Fits the Gktech Z33 350z\/ Z34 370z Crossmember with slight shaving to one side\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cb\u003eWill this transmission mount fit my car?\u003c\/b\u003e\nWe can only confirm fitment of the vehicles listed above. If your vehicle isn't listed there then we can't be sure. Sorry\n\n\u003cb\u003eHow hard is this transmission mount to install?\u003c\/b\u003e\nThe install is pretty easy and shouldn't take any longer than 30 minutes to install with basic tools.\n\n\u003cb\u003e Do I need solid engine mounts to use this transmission mount?\u003c\/b\u003e\nNo, it's quite common for people to only upgrade their transmission mount as this is the part that effects the driver the most.\n\n\u003cb\u003e Do you sell solid engine mounts?\u003c\/b\u003e\nWe do, however they are not for the faint hearted. The transmission mount on its own isn't bad but together with the solid engine mounts they are very extreme and only recommended for track driven cars.\n\n\u003cb\u003e Does the exhaust hanger still bolt up to this mount?\u003c\/b\u003e\nYes, you it sure does. Most transmission mounts available on the market don't have this provision but ours does.\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/wb1Ufxviz_U\" frameborder=\"0\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815223529783,"sku":"SLID-GBOX","price":103.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/slid-gbox1_tb.jpg?v=1752084103"},{"product_id":"s13x-diff","title":"GKTech - front bushings only - S13X-DIFF","description":"\u003cp\u003eThe GKTECH S13 240sx\/R32 diff bushings are to be used when installing an S14\/S15\/R33\/R34 diff in an S13\/R32 subframe. Being solid they ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions.\u003cbr\u003e\u003cbr\u003e- CNC Machined from 6061-T6 aluminium\u003cbr\u003e- 4 Piece Set\u003cbr\u003e\u003cbr\u003e\u003cb\u003eVehicle Compatibility:\u003cbr\u003e\u003c\/b\u003e- Nissan S13 240sx\u003cbr\u003e- Nissan S13 Silvia\u003cbr\u003e- Nissan Skyline R32 GTS-T (2WD)\u003cbr\u003e- Nissan Z32 300zx TT (R230)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: Longer front mount bolts are required when installing an S14\/S15\/R33\/R34 diff in an S13\/R32 subframe (20mm longer = 80mm thread length). Nissan OEM part number is 55424-33P00\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill these fit my car?\u003cbr\u003e \u003c\/b\u003eWe can only confirm fitment for the above vehicles. If your car isn't listed then we don't know if it will fit. Sorry.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDo you make these to suit other cars?\u003cbr\u003e \u003c\/b\u003eNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhere do these go?\u003cbr\u003e \u003c\/b\u003eThese bushings are to be used when installing an S14\/S15\/R33\/R34 diff in an S13\/R32 subframe. The typically S14\/S15\/R33\/R34 diffs have bushings on both the front and rear of the diff where as the S13\/R32 diffs do not. You use the original rear diff cover and then to get the front of the diff positioned correclty these bushings are to be installed.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat’s the advantage of these vs the OEM bushings ?\u003cbr\u003e \u003c\/b\u003eThe more solid the rear is, the better driver control and feel.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDo these cause much vibration\/noise in the cabin?\u003cbr\u003e \u003c\/b\u003eNot really. Obviously anything solid or more rigid is going to cause an increase in noise and vibration however I'd hardly say that it's noticeable. Chances are if you're installing these you've already got coilovers, your car is lowered, you've got an aftermarket exhaust etc. etc. Note that as standard the S13\/R32 diffs are solid mounted.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815223595319,"sku":"S13X-DIFF","price":103.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/2016-05-04_16.29.00_fe51f2bb-63aa-4fba-9ee0-423d05c0f968.jpg?v=1752084106"},{"product_id":"niss-trod","title":"GKTech - Stainless Steel Tie rod end lock spacers - niss-trod","description":"\u003cp\u003eThese spacers slip on to the end of either standard or aftermarket tie rods and allow the tie rods to travel an additional 6mm further into the steering rack which creates more steering lock. Providing around 8-10 degrees more steering angle. Great for drift or getting out of parking spots.\u003cbr\u003e\u003cbr\u003e- Easy DIY installation \u003cbr\u003e- CNC machined stainless steel\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSold as a PAIR\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cb\u003eWhat’s the advantage of tie rod end spacers?\u003c\/b\u003e\nTie rod end spacers give you more steering angle by allowing your tie rods to move further into your steering rack.\n\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nPlease refer to the confirmed vehicle list in the item description. We do not sell any items that aren’t listed on our website and if we haven’t confirmed fitment on your car, then we don’t know if it will fit or not. Please do not ask.\n\n\u003cb\u003eHow wide are these spacers?\u003c\/b\u003e\nThe tie rod end spacers are 0.23'' (6mm) wide each allowing for an additional 12mm of rack travel. \n\n\u003cb\u003eAre these spacers safe to use?\u003c\/b\u003e\nWe have sold tie rod end spacers for many years without any issues. That said, as with all of our products they are strictly sold for off road use only and are not intended for use on public roads.\n\n\u003cb\u003eIs this price for a pair or just for 1 spacer?\u003c\/b\u003e\nThe price listed is for a pair of spacers, 1 spacer for the left of your steering rack, the other for the right.\n\n\u003cb\u003eWhere do these spacers go exactly?\u003c\/b\u003e\nIf you pull out your tie rod, slip on the spacer on the end that goes into the steering rack and then put the tie rod back into the steering rack.\n\n\u003cb\u003eHow much extra lock should I expect to see from these spacers?\u003c\/b\u003e\nYou should see around 8-10 degrees of extra steering lock which is quite significant.\n","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815523324215,"sku":"niss-trod","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/niss-trod_tb.jpg?v=1752084110"},{"product_id":"cstr-endx","title":"GKTech - 240sx\/Skyline Offset tension rod bushing inserts - cstr-endx","description":"\u003cp\u003eThe GKTECH Billet Aluminum offset tension rod end inserts replace the inserts that go into the heim joint of your tension rod and give around 0.39'' more wheel clearance by moving the tension rod over. \u003cbr\u003e\u003cbr\u003eThese are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install. \u003cbr\u003e- To suit heim joints that measure 0.74'' (19mm) internal diameter and that have a width of between 0.82'' - 0.90'' (21mm - 23mm) \u003cbr\u003e- Providing that your heim joint is the size listed above these will fit S13 240sx, S13 Silvia, S14 240sx, S15 Silvia, RWD R32, RWD R33 and RWD R34 Skylines \u003cbr\u003e- Machined from billet 7075-T6 aluminum and anodized for longevity\u003c\/p\u003e\n\u003cb\u003eWill these fit with my tension rods?\u003c\/b\u003e\nWe can only confirm that these fit our V1 and V2 tension rods. They do fit many other tension rods, however we can't test every tension rod that's ever been made. \n\nWe can however tell you that if the heim joint on your tension rod has an internal diameter of 0.74'' (19mm) and is 0.82'' - 0.90'' (21mm - 23mm) in width then these will fit.\n\n\u003cb\u003eDo you make other sizes?\u003c\/b\u003e\nNo, we don't. We only make the parts listed on our website and don't do any custom work.\n\n\u003cb\u003eWhat’s the advantage of these offset tension rod end inserts?\u003c\/b\u003e\nThe inserts move the position of your tension rod over around 0.39'' (10mm) giving you more wheel clearance, as seen in the photo above this has moved the tension rod over enough that the wheel will now hit the swaybar before the tension rod.\n\n\u003cb\u003eIs there anything else that I need to install these inserts?\u003c\/b\u003e\nNope, simply unscrew the bolt that holds the end of the tension rod in, slip out the old inserts and slip these ones in. Piece of cake!","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815524208951,"sku":"cstr-endx","price":43.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/cstr-endx1_tb.jpg?v=1752084118"},{"product_id":"s15x-mirr","title":"GKTech - Aero Mirrors - S15 Silvia - s15x-mirr","description":"\u003cp\u003eAero mirrors to suit the S15 Silvia. These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes. \u003cbr\u003e\u003cbr\u003eManufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: SOLD AS A PAIR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eAre these mirrors electric?\u003c\/b\u003e\nNo, the mirrors are not electric and we do not stock or have access to electric mirrors.\n\n\u003cb\u003eHow do I adjust the mirrors?\u003c\/b\u003e\nThe mirrors are adjusted by simply pushing the glass. Once setup, they will remain in the position you have set.\n\n\u003cb\u003eDo you have mirrors for my car that’s not listed on your website?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it\n\n\u003cb\u003eAre the mirrors glass or plastic?\u003c\/b\u003e\nThe mirrors are real glass.\n\n\u003cb\u003eAre the mirrors painted?\u003c\/b\u003e \nThe mirror case is high quality ABS plastic and has a black base. The majority of people just leave them black however the glass comes out easily so that you can paint the mirror any color you like (as seen on the Holford Motors drift car which now has fluro GKTECH aero mirrors) \n\n\u003cb\u003eHow easy are these mirrors to install myself?\u003c\/b\u003e\nInstallation shouldn’t take you longer than 10 minutes. Everything required is included (minus tools, obviously). Simply remove you standard mirrors and screw these aero mirrors in their place.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815524438327,"sku":"s15x-mirr","price":246.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/mirror-thumb_6.jpg?v=1752084122"},{"product_id":"gtrx-bush","title":"GKTech - S15 Silvia \/ R32 \/ R33 GTR Solid shifter bushing - GTRX-BUSH","description":"\u003cp\u003eReplace your old worn factory shifter bushing and you will drastically improve the feel of your shifter. \u003cbr\u003e- Light weight aluminium bronze construction\u003cbr\u003e- Direct replacement of your plastic factory item\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill this fit my car?\u003c\/b\u003e We can only confirm fitment on the vehicles listed above. If your car is not listed there, then we don't know if it will fit. Chances are, it won't but we don't know\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDo you make these to suit other cars?\u003c\/b\u003e No, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill this suit my aftermarket shifter?\u003c\/b\u003e We don't know. Try fit your standard plastic bushing on your standard shifter, if it fits then our bushing should fit.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill this wear out my transmission?\u003c\/b\u003e No, the actual shifter doesn’t move within the transmission, it is designed to stay firm. The actual shifter moves within the bushing. Minimal wear will take place after years and years, most probably after the chassis has rusted away. \u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCan I install this shifter bushing myself?\u003c\/b\u003e Yes, the installation of the shifter bushing is pretty straight forward. As long as you’ve got some mechanical knowledge, you should be fine. Simply remove your shifter, and replace the bushing you see inside. It shouldn’t take you any more than 20-30 minutes.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815524667703,"sku":"GTRX-BUSH","price":27.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_0317_1.jpg?v=1752084127"},{"product_id":"sr20-rask","title":"GKTech - SR20DE\/SR20DET Rocker Arm Stoppers \/ RAS - sr20-rask","description":"\u003cp\u003eUsed for extra reliability at high RPM in SR engines. These rocker arm stoppers hold the lash adjuster side of the rocker arm at a fixed clearance, preventing extra movement at high RPM. \u003cbr\u003e\u003cbr\u003e- Fits all RWD SR20DE and SR20DET configurations. Ie. S13 240sx\/S14 240sx\/S15 Silvia etc. \u003cbr\u003e- Laser Cut Mild Steel and Zinc coated\u003c\/p\u003e\n\u003cb\u003eWhat’s the advantage of rocker arm stoppers?\u003c\/b\u003e\nRocker arm stoppers hold the lash adjuster side of the rocker arm at a fixed clearance, preventing extra movement at high RPM.\n\n\u003cb\u003eWill these rocker arm stoppers fit my car?\u003c\/b\u003e\nPlease refer to the confirmed vehicle list in the item description. We do not sell any items that aren’t listed on our website and if we haven’t confirmed fitment on your car, then we don’t know if it will fit or not. Please do not ask.\n\n\u003cb\u003eWhat is the difference between these rocker arm stoppers and more expensive items like Tomei, Greddy, Nismo etc.?\u003c\/b\u003e\nTomei, Greddy and Nismo rocker arm stoppers are all laser cut mild steel and are zinc coated. The GKTECH rocker arm stoppers are also laser cut mild steel and are zinc coated. The only difference being is that the GKTECH items are made in Australia.\n\n\u003cb\u003eAre rocker arm stoppers hard to install?\u003c\/b\u003e\nRocker arm stoppers are quite easy to install and shouldn’t take you any longer than around an hour from start to finish.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815524962615,"sku":"sr20-rask","price":103.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/sr20-rask_tb.jpg?v=1752084131"},{"product_id":"s14x-mirr","title":"GKTech - Aero Mirrors - S14 Silvia - RHD - s14x-mirr","description":"\u003cp\u003eAero mirrors to suit the S14 Silvia (RHD). These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes. \u003cbr\u003e\u003cbr\u003eManufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTo suit RHD vehicles. For LHD vehicles please refer to our other listing.\u003cbr\u003e\u003cbr\u003eNOTE: SOLD AS A PAIR\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eAre these mirrors electric?\u003c\/b\u003e\nNo, the mirrors are not electric and we do not stock or have access to electric mirrors.\n\n\u003cb\u003eHow do I adjust the mirrors?\u003c\/b\u003e\nThe mirrors are adjusted by simply pushing the glass. Once setup, they will remain in the position you have set.\n\n\u003cb\u003eDo you have mirrors for my car that’s not listed on your website?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it\n\n\u003cb\u003eAre the mirrors glass or plastic?\u003c\/b\u003e\nThe mirrors are real glass.\n\n\u003cb\u003eAre the mirrors painted?\u003c\/b\u003e\nThe mirror case is high quality ABS plastic and has a black base. The majority of people just leave them black however the glass comes out easily so that you can paint the mirror any color you like (as seen on the Holford Motors drift car which now has fluro GKTECH aero mirrors)\n\n\u003cb\u003eHow easy are these mirrors to install myself?\u003c\/b\u003e\nInstallation shouldn’t take you longer than 10 minutes. Everything required is included (minus tools, obviously). Simply remove you standard mirrors and screw these aero mirrors in their place.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815526437175,"sku":"s14x-mirr","price":246.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/mirror-thumb_4.jpg?v=1752084135"},{"product_id":"trbo-snut","title":"GKTech - 3\" turbo intake snout to suit T25\/T28\/GT2871r etc. - trbo-snut","description":"\u003cp\u003eThe GKTECH billet aluminium turbo intake snout has a 3\" inlet and 2.5\" outlet to suit most 2 bolt turbos including T25, T25g, T28, GT2871r, GT3071r (with 2 bolt front housing) etc. etc.\u003c\/p\u003e\n\u003cb\u003eWhat's the advantage of replacing the turbo intake?\u003c\/b\u003e\nThe turbo intake is restrictive and an intake larger in diameter will help increase the potential power that your car can make.\n\n\u003cb\u003eDo you sell intake pipes to suit?\u003c\/b\u003e\nNo. We have in the past but we no longer make them and don't intend on making any in the future\n\n\u003cb\u003eWill this intake snout suit my turbo?\u003c\/b\u003e\nWe can only confirm fitment for the turbos listed in the product description. If your turbo is now listed, then we can not confirm fitment and we do not know if it will fit. Sorry.\n\n\u003cb\u003eIs this turbo snout a direct install?\u003c\/b\u003e\nThe turbo snout is a direct install on to the turbo however it will not fit with your standard intake pipe. You will need to make a new intake pipe after installing the turbo snout.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815526666551,"sku":"trbo-snut","price":75.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6739_1.jpg?v=1752084139"},{"product_id":"airp-s13x","title":"GKTech - S13\/240SX Radiator Cooling Panel - airp-s13x","description":"\u003cp\u003eThe GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in coolant temperatures on the track.\u003c\/p\u003e\n\u003cp\u003e- CNC laser cut 0.07'' (2mm) aluminium plate\u003cbr\u003e- Available in anodized black\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815526994231,"sku":"airp-s13x","price":164.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/AIRP-S13X-thumb.jpg?v=1752084144"},{"product_id":"sr20-gskt","title":"GKTech - SR20 Stainless Steel 7 layer MLS exhaust manifold gasket - sr20-gskt","description":"\u003cp\u003eThis (MLS) multi layer stainless steel exhaust manifold gasket is a direct replacement of the standard unit and is an upgrade from your general carbon composite manifold gaskets which are prone to blowing out. \u003cbr\u003e\u003cbr\u003e- Race tested and a proven performer \u003cbr\u003e- Replacement for Nissan part 14036-75F00 \u003cbr\u003e- Fits all SR20 applications\u003c\/p\u003e\n\u003cb\u003eWill this gasket fit an SR20DE?\u003c\/b\u003e\nYes, these gaskets will fit the complete SR20 range of engines including the SR20DE.\n\n\u003cb\u003eHave you tested these gaskets under extreme conditions? Ie. Race, drift etc?\u003c\/b\u003e\nYes, we sure have. A number of drift cars competing in ADGP in 2011 (the year we first released these gaskets) were using our exhaust manifold gaskets with great success.\n\n\u003cb\u003eWhat is the advantage of the 7 layer gasket over the single piece gaskets that are available on the market?\u003c\/b\u003e\nThe 7 layer stainless steel gaskets compress however retain their strength. Graphite gaskets as fitted on the S13 and S14’s from the factory are prone to blow outs whereas the 7 layer like fitted to the S15’s are much more reliable and are also reusable.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815527321911,"sku":"sr20-gskt","price":57.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/sr20-gskt2_tb.jpg?v=1752084149"},{"product_id":"145shank","title":"GKTech - S14\/S15\/R32\/R33\/R34\/Z32 ball joint shank - 145SHANK","description":"\u003cp\u003eS14\/S15\/R32\/R33\/R34\/Z32 ball joint shank\u003cbr\u003e\u003cbr\u003eAlso to suit the Gktech rear lower control arms - SKU - REAR-LCAX\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a pair\u003c\/strong\u003e\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815527584055,"sku":"145SHANK","price":56.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/IMG_2513.jpg?v=1752084154"},{"product_id":"r33x-bush","title":"GKTech - R33 GTS-T Solid shifter bushing - R33X-BUSH","description":"\u003cp\u003eReplace your old worn factory shifter bushing and you will drastically improve the feel of your shifter.\u003c\/p\u003e\n\u003cp\u003e- Light weight aluminium bronze construction \u003cbr\u003e- Direct replacement of your plastic factory item\u003cbr\u003e- Replacement part for Nissan part number: 32861-01G00\u003c\/p\u003e\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nWe can only confirm fitment on the vehicles listed above. If your car is not listed there, then we don't know if it will fit. Chances are, it won't but we don't know.\n\n\u003cb\u003eDo you make these to suit other cars?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.\n\n\u003cb\u003eWill this suit my aftermarket shifter?\u003c\/b\u003e\nWe don't know. Try fit your standard plastic bushing on your standard shifter, if it fits then our bushing should fit.\n\n\u003cb\u003eWill this wear out my transmission?\u003c\/b\u003e\nNo, the actual shifter doesn’t move within the transmission, it is designed to stay firm. The actual shifter moves within the bushing. Minimal wear will take place after years and years, most probably after the chassis has rusted away.\n\n\u003cb\u003eCan I install this shifter bushing myself?\u003c\/b\u003e\nYes, the installation of the shifter bushing is pretty straight forward. As long as you’ve got some mechanical knowledge, you should be fine. Simply remove your shifter, and replace the bushing you see inside. It shouldn’t take you any more than 20-30 minutes.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815528042807,"sku":"R33X-BUSH","price":27.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_0315_1.jpg?v=1752084159"},{"product_id":"s134-bolt","title":"GKTech - S13 240sx\/R32 Eccentric lockout kit (non HICAS equipped vehicles) - s134-bolt","description":"\u003cp\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/p\u003e\n\u003cp\u003eTo suit non HICAS equipped vehicles (also available for HICAS equipped vehicles). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: if you require S14, S15 or R33 etc. eccentric lockout kits please refer to our other listing to suit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eWhat is the advantage of installing the GKTECH eccentric lockout kit?\u003c\/b\u003e\nThe standard adjustable bolts are prone to slipping under hard driving conditions. The lockout kit ensures that there is zero movement.\n\n\u003cb\u003eWhat about my camber\/toe adjustment?\u003c\/b\u003e\nThe eccentric lockout kit is to be installed with adjustable arms. The arms alone should have more than enough adjustment that you'll ever need.\n\n\u003cb\u003eWhat is the difference between the HICAS and non HICAS version of your kits?\u003c\/b\u003e\nThe HICAS kits only come with lockouts for camber where as if you don't have HICAS you will need twice as many bolts and washers to suit camber and toe lockout.\n\n\u003cb\u003eWhat if I'm running an S14\/S15 rear subframe in my S13?\u003c\/b\u003e\nYou will need to purchase an S14\/S15 rear lockout kit. The bolt lengths are different between the 2 kits for the toe arm mount.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815528304951,"sku":"s134-bolt","price":112.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6506_thumb_e839827b-f796-4186-a47b-06bcd737d5f7.jpg?v=1752084163"},{"product_id":"r32x-mirr","title":"GKTech - Aero Mirrors - R32 Skyline - R32X-MIRR","description":"\u003cp\u003eAero mirrors to suit the R32 Skyline. These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes.\u003c\/p\u003e\n\u003cp\u003eManufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: SOLD AS A PAIR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eAre these mirrors electric?\u003c\/b\u003e\nNo, the mirrors are not electric and we do not stock or have access to electric mirrors.\n\n\u003cb\u003eHow do I adjust the mirrors?\u003c\/b\u003e\nThe mirrors are adjusted by simply pushing the glass. Once setup, they will remain in the position you have set.\n\n\u003cb\u003eDo you have mirrors for my car that’s not listed on your website?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it\n\n\u003cb\u003eAre the mirrors glass or plastic?\u003c\/b\u003e\nThe mirrors are real glass.\n\n\u003cb\u003eAre the mirrors painted?\u003c\/b\u003e \nThe mirror case is high quality ABS plastic and has a black base. The majority of people just leave them black however the glass comes out easily so that you can paint the mirror any color you like (as seen on the Holford Motors drift car which now has fluro GKTECH aero mirrors) \n\n\u003cb\u003eHow easy are these mirrors to install myself?\u003c\/b\u003e\nInstallation shouldn’t take you longer than 10 minutes. Everything required is included (minus tools, obviously). Simply remove you standard mirrors and screw these aero mirrors in their place.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815528599863,"sku":"R32X-MIRR","price":246.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/mirror-thumb.jpg?v=1752084168"},{"product_id":"airp-s132","title":"GKTech - S13 240sx Silvia Radiator Cooling Panel Side Panels (Pair) - AIRP-S132","description":"\u003cp\u003e.The GKTECH S13 240sx Silvia air diversion panels sit between your headlights and the radiator support and help clean up the look of your car. \u003cbr\u003e\u003cbr\u003e- CNC laser cut 0.07'' (2mm) aluminium plate \u003cbr\u003e- Available in anodized black or silver (this listing is for black)\u003cbr\u003e- Sold as a pair (left and right)\u003cbr\u003e\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815529648439,"sku":"AIRP-S132","price":123.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/AIRP-S132-thumb.jpg?v=1752084181"},{"product_id":"sr20-ball","title":"GKTech - 41mm KA24\/SR20\/CA18\/RB20 strengthened clutch pivot ball - SR20-BALL","description":"\u003cp\u003eThe GKTECH 41mm SR20\/CA18\/RB20 clutch pivot ball is a direct replacement of the standard item however it is considerably stronger being made from 40Cr steel. If upgrading to a heavy duty clutch it is a good idea to swap out the clutch fork pivot. \u003cbr\u003e\u003cbr\u003e- Alternative for Nismo part 30537-RS540 \u003cbr\u003e- Fits all SR20DE\/DET, CA18DE\/DET and RB20DE\/DET applications\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815529910583,"sku":"SR20-BALL","price":27.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/2015-10-14_13.11.30.jpg?v=1752084186"},{"product_id":"rbxx-ball","title":"GKTech - 54mm BNR32\/Z32\/R33 GTS-T strengthened clutch pivot ball - RBXX-BALL","description":"\u003cp\u003eThe GKTECH 54mm clutch pivot ball is a direct replacement of the standard item however it is considerably stronger being made from 40Cr steel. If upgrading to a heavy duty clutch it is a good idea to swap out the clutch fork pivot. \u003cbr\u003e\u003cbr\u003e- Alternative for Nismo part 30537-RS581 \u003cbr\u003e- Fits BNR32 GTR's (push only), Z32 300zx's and R33's RB25DET's\u003cbr\u003e- Fits early G35\/350Z (CD001 Transmission)\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815530172727,"sku":"RBXX-BALL","price":27.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_9493.jpg?v=1752084190"},{"product_id":"univ-bovb","title":"GKTech - 28mm Blow Off Valve return blocker - univ-bovb","description":"\u003cp\u003eThe GKTECH Blow Off Valve return blocker and is to be used on the intake pipe when the standard blow off valve is removed. \u003cbr\u003e\u003cbr\u003eIf the hole left from removing the blow off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough.\u003c\/p\u003e\n\u003cp\u003e- 1 piece billet aluminium construction \u003cbr\u003e- Direct replacement\u003cbr\u003e- 28mm(1.10') in diameter\u003c\/p\u003e\n\u003cb\u003eWhat does this blow off valve blocker do?\u003c\/b\u003e\nThe blow off valve blocker is a direct replacement of the factory return pipe on the intake pipe. \n\nIf you’re removing your blow off valve you’re going to need to plug up the hole that is left in the intake pipe. This blow off valve blocker is a perfect fit and is designed specifically for this job.\n\n\u003cb\u003eWill this suit my car?\u003c\/b\u003e\nPlease refer to the confirmed vehicle list in the item description. We do not sell any items that aren’t listed on our website and if we haven’t confirmed fitment on your car, then we don’t know if it will fit or not. Please do not ask.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815530434871,"sku":"univ-bovb","price":26.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/valve_black_tn.jpg?v=1752084195"},{"product_id":"trbo-otlt","title":"GKTech - Turbo to intercooler hotpipe snout - trbo-otlt","description":"\u003cp\u003eThe GKTECH billet aluminium turbo to intercooler hotpipe snout is 2\" and is a bolt on to most Nissan turbos including T25, T25g, T28, GT2871r, GT3071r (with 3 bolt front housing outlet).\u003c\/p\u003e\n\u003cp\u003eA great item if you're installing a different turbo on your car and want an easy way to get your intercooler piping to line up. Also includes 0.23'' vacuum line fitting.\u003cbr\u003e\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815530959159,"sku":"trbo-otlt","price":86.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_4267.jpg?v=1752084199"},{"product_id":"s145-bolt","title":"GKTech - S14\/S15\/R33 Eccentric lockout kit (non HICAS) - s145-bolt","description":"\u003cp\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set. To suit non HICAS equipped vehicles (also available for HICAS equipped vehicles).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: if you require S13 Silvia, 240sx, R32 Skyline or A31 Cefiro etc. eccentric lockout kits please refer to our other listing to suit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eWhat is the advantage of installing the GKTECH eccentric lockout kit?\u003c\/b\u003e\nThe standard adjustable bolts are prone to slipping under hard driving conditions. The lockout kit ensures that there is zero movement.\n\n\u003cb\u003eWhat about my camber\/toe adjustment?\u003c\/b\u003e\nThe eccentric lockout kit is to be installed with adjustable arms. The arms alone should have more than enough adjustment that you'll ever need.\n\n\u003cb\u003eWhat is the difference between the HICAS and non HICAS version of your kits?\u003c\/b\u003e\nThe HICAS kits only come with lockouts for camber where as if you don't have HICAS you will need twice as many bolts and washers to suit camber and toe lockout.\n\n\u003cb\u003eWhat if I'm running an S14\/S15 rear subframe in my S13\/240sx?\u003c\/b\u003e\nYou will need to purchase an S14\/S15 rear lockout kit. The bolt lengths are different between the 2 kits.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815531778359,"sku":"s145-bolt","price":97.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6502.jpg?v=1752084204"},{"product_id":"s145-hrse","title":"GKTech - S14\/S15 E-Brake Extenders - s145-hrse","description":"\u003cp\u003eThe GKTECH e-brake extenders are a direct replacement of your standard item and give more leverage which in turn helps lock up the rear brakes. Great for drift!\u003cbr\u003e\u003c\/p\u003e\n\u003cb\u003eWhat is the advantage of installing the GKTECH e-brake extender?\u003c\/b\u003e\nThe e-brake extender gives you more leverage which helps lock up your rear brakes.\n\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nIf your car is listed above and you're running the standard e-brake then it will be a direct fit without any modifications. If your car isn't listed, then we don't know if it will fit. Sorry.\n\n\u003cb\u003eWhat if I'm running R32 or R33 brakes on my S14\/S15?\u003c\/b\u003e\nThis will not work as the R32 and R33's run a drum brake and it's a completely different setup.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815532073271,"sku":"s145-hrse","price":136.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_5067_1.jpg?v=1752084209"},{"product_id":"s13x-mirr","title":"GKTech - Aero Mirrors - S13 240sx - RHD - S13x-mirr","description":"\u003cp\u003eAero mirrors to suit the S13 240sx. These mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes.\u003cbr\u003e\u003cbr\u003eManufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box. No need to prepare or paint. \u003cbr\u003e\u003cstrong\u003e\u003cbr\u003eTo suit RHD vehicles. For LHD vehicles please refer to our other listing.\u003cbr\u003e\u003cbr\u003eNOTE: SOLD AS A PAIR\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eAre these mirrors electric?\u003c\/b\u003e\nNo, the mirrors are not electric and we do not stock or have access to electric mirrors.\n\n\u003cb\u003eHow do I adjust the mirrors?\u003c\/b\u003e\nThe mirrors are adjusted by simply pushing the glass. Once setup, they will remain in the position you have set.\n\n\u003cb\u003eDo you have mirrors for my car that’s not listed on your website?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it\n\n\u003cb\u003eAre the mirrors glass or plastic?\u003c\/b\u003e\nThe mirrors are real glass.\n\n\u003cb\u003eAre the mirrors painted?\u003c\/b\u003e \nThe mirror case is high quality ABS plastic and has a black base. The majority of people just leave them black however the glass comes out easily so that you can paint the mirror any color you like (as seen on the Holford Motors drift car which now has fluro GKTECH aero mirrors) \n\n\u003cb\u003eHow easy are these mirrors to install myself?\u003c\/b\u003e\nInstallation shouldn’t take you longer than 10 minutes. Everything required is included (minus tools, obviously). Simply remove you standard mirrors and screw these aero mirrors in their place.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815532368183,"sku":"S13x-mirr","price":246.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/mirror-thumb_2.jpg?v=1752084214"},{"product_id":"s13x-bash","title":"GKTech - S13 240sx Under Engine Skid Plate - s13x-bash","description":"\u003cp\u003eSave your sump and K frame with this under engine skid plate. This is designed with low cars in mind and will reduce the risk of damage. It will also help reduce turbulence and improve airflow.\u003cbr\u003e\u003cbr\u003e- 3.0mm thick aluminium\u003cbr\u003e- 100% perfect fitment\u003cbr\u003e- Fits S13 240sx \/ Silvia\u003c\/p\u003e\n\u003cb\u003eDo you sell skid plates for other cars?\u003c\/b\u003e\nWe only sell the products listed on our website. If it's not listed on here, then we don't sell it. We don't do any custom work. Sorry.\n\n\u003cb\u003eWill this skid plate fit with my aftermarket sump?\u003c\/b\u003e\nProviding that your sump doesn’t sit below the K frame then this skid plate will fit.\n\n\u003cb\u003eWill this skid plate fit with my aftermarket swaybar?\u003c\/b\u003e\nProviding that your swaybar doesn’t sit higher than the level of the K frame (which is the line that the skid plate follows) then you’ll be fine. Almost all swaybars sit below the level of the K frame however please check your vehicle before purchasing.\n\n\u003cb\u003eI’m running a different engine in my car, will this skid plate fit?\u003c\/b\u003e\nProviding that your sump doesn’t sit below the K frame and that you’re running the standard K frame meant for the vehicle that you’re buying the skid plate for, then this skid plate will fit.\n\n\u003cb\u003eDo I need to modify anything for the skid plate to fit?\u003c\/b\u003e\nThere shouldn’t be any need for anything to be modified to fit the skid plate. If you’re running an aftermarket intercooler then the brackets for that may bolt up to the lower radiator support and may get in the way but this can easily be resolved by using the skid plate as the mounting point.\n\n\u003cb\u003eWill I still be able to drain the oil from my sump with the skid plate fitted?\u003c\/b\u003e\nYes, the skid plate has a provision for the stock oil drain position. If you’re running an aftermarket sump it may be in a different position to the standard oil drain.\n\nUnfortunately it’s not possible to cater for everyone and if you’re using an aftermarket sump, please take this into consideration.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815532597559,"sku":"s13x-bash","price":328.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/2015-10-14_16.00.jpg?v=1752084218"},{"product_id":"sr20-casx","title":"GKTech - Clear SR20DET CAS cover - sr20-casx","description":"\u003cp\u003e- Direct replacement of the standard item \u003cbr\u003e- Light weight \u003cbr\u003e- Durable design for the roughest conditions \u003cbr\u003e- Designed for race use \u003cbr\u003e- CAS not included\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat does this sexy looking piece of plastic do?\u003cbr\u003e\u003c\/b\u003eThis sexy looking piece of plastic does absolutely nothing that your standard CAS cover doesn’t do except that it’s clear rather than a solid like your standard item.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIs this a direct replacement of the standard item?\u003cbr\u003e\u003c\/b\u003eYes, this is a direct replacement of your standard item.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCan I install this item myself?\u003cbr\u003e\u003c\/b\u003eYes, installation is very easy and shouldn’t take any longer than around 2 minutes to install.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill this fit on an SR20DE motor?\u003cbr\u003e\u003c\/b\u003eNo, this will not fit an SR20DE as the non-turbo motors run a distributor setup rather than a CAS and coil pack so there is no CAS to replace the cap of.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWill this fit a FWD motor?\u003cbr\u003e\u003c\/b\u003eNo, this will not fit a FWD motor as the non-turbo motors run a distributor setup rather than a CAS and coil pack so there is no CAS to replace the cap of.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815532859703,"sku":"sr20-casx","price":47.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/sr20-casx_tb.jpg?v=1752084223"},{"product_id":"airp-s141","title":"GKTech - S14 (Zenki) 240sx Radiator Cooling Panel - AIRP-S141","description":"\u003cp\u003eThe GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in water temperatures on the track.\u003c\/p\u003e\n\u003cp\u003e- CNC laser cut 2mm aluminium plate\u003cbr\u003e- Available in anodized black or silver (this listing is for black)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n[\"NISSAN S14 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815533121847,"sku":"AIRP-S141","price":205.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/AIRP-S141-thumb.jpg?v=1752084228"},{"product_id":"trbo-adpt","title":"GKTech - S13 SR20DET T28 turbo clocking adapter plates - trbo-adpt","description":"\u003cp\u003eThe GKTECH aluminium turbo adapters allow the use of the standard S13 SR20DET turbo snout\/intake and hot pipe snout with any GT28 turbo. This makes installing a T28 on a redtop SR20DET a piece of cake and saves the headache of having to get custom pipe work made up.\u003c\/p\u003e\n\u003cp\u003eWill suit all T28, GT2871r, GT3071r etc. (with 2 bolt front housing)\u003c\/p\u003e\n[\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815533547831,"sku":"trbo-adpt","price":100.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6300_1.jpg?v=1752084234"},{"product_id":"4to5-spcr","title":"GKTech - 4 to 5 lug wheel adaptors - 4to5-spcr","description":"\u003cp\u003eThe GKTECH 4 to 5 lug wheel adaptors allow a 4x114.3 lug car to fit 5x114.3 lug wheels. Sold as a pair these wheel adaptors bolt on to your standard hub just like a normal wheel spacer however 1 of your standard lugs is then replaced with a longer lug which runs through the adaptor and acts as the 5th lug. \u003cbr\u003e\u003cbr\u003eThe wheel adaptors are hub centric to suit Nissans 66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength. \u003cbr\u003e\u003cbr\u003eA super easy and cheap way to make your S13 240sx 5 lug and use the superior wheel options! \u003cbr\u003e\u003cbr\u003eFeatures: \u003cbr\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 lugs\u003cbr\u003e- Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread \u003cbr\u003e- 20mm thick wheel adaptors \u003cbr\u003e- Includes extra wheel lugs required to install the adaptors. \u003cbr\u003e- Sold as a \u003cstrong\u003ePAIR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cb\u003eWhat's involved in installing these adaptors?\u003c\/b\u003e\nYou will need to press a new lug (included) into the hub and then simply bolt on the wheel adaptor. \n\nOnce the wheel spacers are bolted on you will need to mark the standard wheel lugs and trim accordingly. The standard wheel lugs are 1.02\" (26mm) in length and the spacers are 20mm so that extra 0.23\" (6mm) needs to be trimmed off the standard lugs.\n\n\u003cb\u003eDo you make different sized or PCD wheel spacers?\u003c\/b\u003e\nWe only sell the items listed on our website. If it's not listed on our website then we don't make it and we can't help. Sorry.\n\n\u003cb\u003eAre these safe?\u003c\/b\u003e\nThese are no different to any other wheel spacer. They are machined from T6-6061 aluminium and are hub centric with grade 10.9 lugs. They're strong!\n\n\u003cb\u003eI damaged\/ lost my socket, do you sell replacements?\u003c\/b\u003e\nWe do young man - \u003ca href=\"https:\/\/us.gktech.com\/4-to-5-lug-wheel-adapter-socket\"\u003ehttps:\/\/us.gktech.com\/4-to-5-lug-wheel-adapter-socket\u003c\/a\u003e\n\n\u003cb\u003eI damaged\/lost my wheel nuts, do you sell replacements?\u003c\/b\u003e\nWe do as well, younger man - \u003ca href=\"https:\/\/us.gktech.com\/short-nuts-sold-in-packs-of-5\"\u003ehttps:\/\/us.gktech.com\/short-nuts-sold-in-packs-of-5\u003c\/a\u003e\n\n\u003cb\u003eWhat is the O.D of the spacer?\u003c\/b\u003e\n150mm","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815533941047,"sku":"4to5-spcr","price":232.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/4to5-thmb-transformed.jpg?v=1752084241"},{"product_id":"m10x-knob","title":"GKTech - M10 x 1.25 - M10X-KNOB","description":"45mm in diameter billet T6-6061 aluminium gear knob. \u003cbr\u003e\u003cbr\u003e -Light weight aluminium construction - weighing only 120g \u003cbr\u003e- Anodized black\u003cbr\u003e- Durable design for the roughest conditions \u003cbr\u003e\u003cbr\u003e \u003cb\u003eNOTE: Being a anodized product exposed to direct sunlight and being often used the color will naturally fade to a bronze over time\u003c\/b\u003e\n\u003cb\u003eWhat is the thread size?\u003c\/b\u003e\nThis suits most Nissans. Please check your car's thread size before purchasing.\n\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nWe don't know. Please find out if your vehicle is the same as this gear knob. We don't know what size thread every gear stick on the Planet is, Google does :)\n\n\u003cb\u003eWill this fit my aftermarket shifter?\u003c\/b\u003e\nWe don't know. Please find out what thread your aftermarket shifter is.\n\n\u003cb\u003eDo you make these gear knobs in other thread sizes?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.\n\n\u003cb\u003eDo you make any different colors?\u003c\/b\u003e\nNo, we only sell the products listed on our website. If it's not listed on here, then we don't sell it. Sorry.\n\n\u003cb\u003eWhat is the diameter of the gear knob?\u003c\/b\u003e\nThe gear knob is 45mm’s in diameter.\n\n\u003cb\u003eWhat is the weight of the gear knob?\u003c\/b\u003e\nThe gear knob is approximately 125grams.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815534137655,"sku":"M10X-KNOB","price":34.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/gear-knob1_tb_2_9.jpg?v=1752084245"},{"product_id":"trbo-lock","title":"GKTech - T2 stainless steel turbo locking tabs - TRBO-LOCK","description":"\u003cp\u003eThe GKTECH stainless steel turbo locking tabs are critical in keeping your turbo nuts in their place and stopping them from coming loose. The factory items are typically damaged from the heat of the turbo after a number of years so it's a good idea when you've got the turbo off, to replace these at the same time.\u003cbr\u003e\u003cbr\u003eSimply bend up the ends of the tabs against the turbo nuts to keep them in their place. \u003cbr\u003e\u003cbr\u003e- Alternative for Nissan part 14495-40P10 \u003cbr\u003e- Fits all T2 flanged turbo applications (ie. T25, T28, GT2871r etc. etc.) \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE: Sold as a PAIR\u003c\/b\u003e\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815534432567,"sku":"TRBO-LOCK","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_9470.gif?v=1752084249"},{"product_id":"gtrx-clch","title":"GKTech - R32\/R33\/R34 GTR braided clutch line - GTRX-CLCH","description":"\u003cp\u003eThe GKTECH braided clutch lines are a direct replacement and are stronger than the OEM lines. The OEM lines are rubber which are economical to produce but after 20+ years, they're prone to splitting and are susceptible to expanding which in turn gives a spongy feeling, particuarly when heat is introduced. Our braided clutch lines remove this spongy feeling.\u003c\/p\u003e\n\u003cp\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e \u003cbr\u003e- Nissan R32 GTR Skyline \u003cbr\u003e- Nissan R33 GTR Skyline\u003cbr\u003e- Nissan R34 GTR Skyline\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat is the length of the clutch line?\u003c\/b\u003e\u003cbr\u003e 81 cm.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815534694711,"sku":"GTRX-CLCH","price":81.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/IMG_6203.jpg?v=1752084254"},{"product_id":"s132-bolt","title":"GKTech - S13\/S14 240sx\/R32\/R33\/R34\/Z32 Eccentric lockout kit (HICAS equipped vehicles) - s132-bolt","description":"\u003cp\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set. To suit HICAS equipped vehicles (also avaiable for non HICAS equipped vehicles). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e \u003cbr\u003e- Nissan S13 240sx\u003cbr\u003e- Nissan S13 Silvia\u003cbr\u003e- Nissan S14 240sx\u003cbr\u003e- Nissan S14 Silvia\u003cbr\u003e- Nissan S15 Silvia\u003cbr\u003e- Nissan Skyline R32 GTS-T \u003cbr\u003e- Nissan Skyline R32 GTR \u003cbr\u003e- Nissan Skyline R33 \u003cbr\u003e- Nissan Skyline R34 \u003cbr\u003e- Nissan C34 \u003cbr\u003e- Nissan C35 \u003cbr\u003e- Nissan A31 Cefiro \u003cbr\u003e- Nissan 300ZX Z32\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat is the advantage of installing the GKTECH eccentric lockout kit?\u003cbr\u003e \u003c\/b\u003eThe standard adjustable bolts are prone to slipping under hard driving conditions. The lockout kit ensures that there is zero movement.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat about my camber\/toe adjustment?\u003cbr\u003e \u003c\/b\u003eThe eccentric lockout kit is to be installed with adjustable arms. The arms alone should have more than enough adjustment that you'll ever need.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat is the difference between the HICAS and non HICAS version of your kits?\u003cbr\u003e \u003c\/b\u003eThe HICAS kits only come with lockouts for camber where as if you don't have HICAS you will need twice as many bolts and washers to suit camber and toe lockout.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815534924087,"sku":"s132-bolt","price":63.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6498.jpg?v=1752084258"},{"product_id":"radx-capx","title":"GKTech - Nissan 1.3kg\/cm2 high pressure radiator cap - RADX-CAPX","description":"\u003cp\u003eThe GKTECH 1.3kg\/cm2 high pressure radiator cap is a direct fit for all Nissans and raises the pressure in the coolant system to 1.3kg\/cm2 (from 0.9 for most Nissans). Extra pressure allows for a higher boiling point = better cooling.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNOTE: Do NOT remove your radiator cap while your car is hot. \u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n[\"NISSAN C33 LAUREL\",\"NISSAN C34 LAUREL\",\"NISSAN C35 LAUREL\",\"NISSAN CEFIRO A31\",\"NISSAN R32 SKYLINE GTR\",\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN R33 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN R34 SKYLINE GTR\",\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\",\"INFINITI G35 SKYLINE\",\"INFINITI G37 SKYLINE\",\"NISSAN Z32 300ZX\",\"NISSAN Z33 350Z\",\"NISSAN Z34 370Z\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815535448375,"sku":"RADX-CAPX","price":22.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_0668-1_1.jpg?v=1752084269"},{"product_id":"scrw-drvr","title":"GKTech - Screwdriver vehicle key end - SCRW-DRVR","description":"\u003cp\u003e\u0026gt;\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work with my car key?\u003c\/strong\u003e\u003cbr\u003eWe can't be 100% sure but it will suit just about any car key as long as it does not have a transponder. We don't know if you car key has a transponder built into it but if you have a look at your car keys, it's pretty easy to see.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat blank car keys do you have?\u003c\/strong\u003e\u003cbr\u003eWe only have 2 different blank car keys which are available for purchase at $4 each and you can select one at the time of ordering the blank end. They suit S13, S13, 240sx, S14, S15 (not Australian delivered as it has a transponder), A31, A33, R31, R32, R33, N14, RNN14, Z31, Z32, C33\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I trim my current key down to size to suit the screwdriver end?\u003c\/strong\u003e\u003cbr\u003eIt's pretty straight forward and if you've got a grinder and you know how to turn the grinder on, you should be fine. You need to trim the key end down to 20mm's in width and it can't be thicker than 2.0mm's and you can slide it right into the hole and it is then secured with a grub screw that's hidden in the side of the screwdriver end.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo you make these in any other colours?\u003cbr\u003e\u003c\/strong\u003eNo, we only make these in the colour shown and we have no intention of making any other colours. Sorry. \u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815535644983,"sku":"SCRW-DRVR","price":13.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_9869_1.jpg?v=1752084273"},{"product_id":"clch-line","title":"GKTech - S13\/S14\/S15 Damper Delete - RHD - CLCH-LINE","description":"\u003cp\u003eThe GKTECH braided clutch lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the clutch. The line runs directly from the master cylinder to the slave.\u003c\/p\u003e\n\u003cp\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e \u003cbr\u003e- Nissan S13 Silvia \u003cbr\u003e- Nissan 180sx \u003cbr\u003e- Nissan S14 Silvia \u003cbr\u003e- Nissan S15 Silvia\u003c\/p\u003e\n\u003cb\u003eWhat is the length of the clutch line?\n\u003c\/b\u003e\n61 cm.\n\n\u003cb\u003eWill this fit a LHD car?\u003c\/b\u003e\nNo. These are to suit RHD cars only.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815535939895,"sku":"CLCH-LINE","price":81.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_8385_1_14_1.jpg?v=1752084277"},{"product_id":"stal-brke","title":"GKTech - Stand alone SS braided brake line kit - STAL-BRKE","description":"\u003cp\u003eThe GKTECH Wilwood stand alone SS braided brake line kit are designed to be used with Wilwood calipers in the rear (1\/8-27 NPT) and to be used with a Wilwood master cylinder (with a 3\/8-24 thread). These lines go all the way from the master cylinder to the rear calipers.\u003c\/p\u003e\n\u003cp\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill suit ALL S\/R\/Z\/A chassis Nissans.\u003c\/strong\u003e\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTR\",\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN R33 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815536169271,"sku":"STAL-BRKE","price":249.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/STAL-BRAKE-THUMB-_0000_IMG_E6655.jpg?v=1752084282"},{"product_id":"2pot-line","title":"GKTech - 240sx\/Skyline stand alone SS e-brake braided brake line kit - 2POT-LINE","description":"\u003cp\u003eThe GKTECH 240sx\/Skyline stand alone braided brake line kit is designed to be used with Nissan 2 pot calipers, when setting up a dual caliper hydraulic e-brake.\u003cbr\u003e\u003cbr\u003eThese lines go all the way from any selected master cylinder with a 3\/8-24 thread to the rear calipers. \u003cbr\u003eAs seen in our V2 e-brake assembly, as seen here: \u003ca href=\"https:\/\/us.gktech.com\/v2-hydraulic-e-brake-assembly-handle\"\u003ehttps:\/\/us.gktech.com\/v2-hydraulic-e-brake-assembly-handle\u003c\/a\u003e\u003ca href=\"https:\/\/us.gktech.com\/v2-hydraulic-e-brake-assembly-handle\"\u003e\u003cbr\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.\u003c\/p\u003e\n[\"NISSAN C33 LAUREL\",\"NISSAN C34 LAUREL\",\"NISSAN C35 LAUREL\",\"NISSAN CEFIRO A31\",\"NISSAN R32 SKYLINE GTR\",\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN R33 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN R34 SKYLINE GTR\",\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815536529719,"sku":"2POT-LINE","price":267.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/IMG_6216_ade4e199-5fe4-4789-8b3d-5220681cdfe0.jpg?v=1752084286"},{"product_id":"r323-clch","title":"GKTech - R32\/R33 GTS-T Non Damper Delete - R323-CLCH","description":"\u003cp\u003eThe GKTECH braided clutch lines are a direct replacement of the factory lines and are stronger than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the clutch. \u003c\/p\u003e\n\u003cp\u003eThese lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection.\u003c\/p\u003e\n\u003cp\u003eNOTE: This listing is for a non damper delete replacement line. Ie. this line replaces only the OEM rubber line. If you'd like to replace the hard line and rubber line all the way from the master to the slave, please refer to our damper delete line kit. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e\u003cbr\u003e- Nissan R32 GTS-T Skyline\u003cbr\u003e- Nissan R33 GTS-T Skyline\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhat are the differences in line length?\u003c\/b\u003e \u003cbr\u003eThe OEM clutch damper delete clutch line that runs from the master cylinder to the slave cylinder measures 50cm end to end. The clutch line which retains the factory clutch damper system which goes to the slave cylinder measures 28cm end to end.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHow do I know which clutch line I need?\u003c\/b\u003e \u003cbr\u003eThe option is up to yourself, if you are doing a manual conversion and you don't want to run the bulky factory damper system or if you wanted to have things less complicated and clean up the appearance then you would select the damper delete option.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eI am doing a manual conversion, which clutch line do I buy?\u003cbr\u003e\u003c\/strong\u003eUnless you have all the damper hard lines, which is super uncommon when purchasing a conversion, all you would need is the one line from the master cylinder to the slave cylinder being the damper delete.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815537086775,"sku":"R323-CLCH","price":75.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/oemlinereplacement_new_7.jpg?v=1752084297"},{"product_id":"r334-knck","title":"GKTech - R32\/R33\/R34\/Z32 Knuckle - R334-KNCK","description":"\u003cp\u003eThe V2 GKTECH Super Lock R32\/R33\/R34\/Z32 Front knuckles have been developed with the learnings from our previous V1 aluminium knuckles and we now present a light weight, sheet metal design after hundreds of hours of FEA (Finite Element Analysis) to improve the strength of the product but also keep the weight down. With 65+ degrees of steering lock being able to be achieved with ease whilst keeping a linear steering response these knuckles are suited to drift or circuit racers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeaturing:\u003c\/strong\u003e\u003cbr\u003e- spindle height raised for roll center and bump steer correction\u003cbr\u003e- 65+ degrees of steering lock\u003cbr\u003e- lightweight (3.08lbs lighter EACH)\u003cbr\u003e- linear steering response for optimal drive\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation notes\u003cbr\u003e\u003c\/strong\u003e- Our offset steering rack spacers are recommended to eliminate the chance of steering bind.\u003cbr\u003e- Steering lock of 65+ degrees quoted is based on having wheel clearance. If you have high offset wheels and your wheel hits the chassis then you may get less than this amount of steering lock.\u003cbr\u003e- Only suits RWD steering setups. GTS-4 and GTR front suspension setups are different and these knuckles will NOT work with them. \u003cbr\u003e- When using R34 front brake calipers the mounting holes need to be drilled out from 12mm to 14mm (there is enough material to cater for the increase in hole diameter).  \u003cbr\u003e- Does NOT have a provision for ABS\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow hard are these to fit?\u003c\/strong\u003e\u003cbr\u003eThey are quite easy to install but mechanical knowledge is certainly required. Remove your standard knuckles, press out the old hubs, press the hubs into the new knuckles and the knuckles will bolt straight in. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo you make knuckles for other cars?\u003cbr\u003e\u003c\/strong\u003eWe make knuckles for S and R chassis Nissans, we don't make them for any other cars.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHow much angle can I get from these knuckles?\u003cbr\u003e\u003c\/strong\u003eDepending on the width and offset of your rims, and whether you're running standard lower control arms or notched\/modified lower control arms (or standard) you will see between 60 degrees - 70 degrees of steering lock.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eAre these suited to circuit\/grip racing?\u003c\/strong\u003e\u003cbr\u003eYes, absolutely. The weight saving and the roll center and bump steer correction is great for additional front end grip and the steering arm length means quite linear steering.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDo I need to do any other modifications to get the most from these knuckles? \u003cbr\u003e\u003c\/strong\u003eYes, notched lower control arms or atleast modified bump stops will help. Rack spacers are recommended or alternatively longer tie rods or some of our tie rod ends (adjustable length). Note that of all of the steering racks, the R33 steering rack provides the least amount of travel so if you are chasing every last degree of angle, swapping to an R32 steering rack will give a few more degrees of lock.\u003c\/p\u003e","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815537709367,"sku":"R334-KNCK","price":1519.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/2016-09-21_15.38.54_9.jpg?v=1752084301"},{"product_id":"s13x-wshr","title":"GKTech - 4 lug knuckle washers - S13X-WSHR","description":"\u003cp\u003eS13 knuckle spacer for GTRX-ADPT\/350Z-ADPT\u003c\/p\u003e\n\u003cp\u003eThickness - 3.6mm\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815537938743,"sku":"S13X-WSHR","price":28.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6031.jpg?v=1752084306"},{"product_id":"13shank","title":"GKTech - S13 ball joint shank - 13SHANK","description":"\u003cp\u003eS13\/R32\/Z32 ball joint shank\u003c\/p\u003e\nNULL","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815538561335,"sku":"13SHANK","price":73.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_3052_1_62aaf96d-5ada-4ea6-b7f0-3180789b6a5b.jpg?v=1752084317"},{"product_id":"4way-brke","title":"GKTech - Stainless Steel 4 way brake union - 4WAY-BRKE","description":"\u003cp\u003eThe GKTECH Stainless steel 4 way brake union is designed to be used in conjunction with our brake booster delete kits however can be used in a variety of applications.\u003c\/p\u003e\n\u003cp\u003eM10x1.0 thread with a 60 degree taper.\u003c\/p\u003e\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nThe stainless steel 4-way brake union is a universal fit and can be made to fit any vehicle.\n\n\u003cb\u003eWhat's the advantage of using the stainless steel 4-way union?\u003c\/b\u003e\nThis is a custom machined part that is super strong being made of stainless steel and allows four M10x1.0 fittings with a 60-degree taper to be used in the single junction.\n\n\u003cb\u003eWhat modifications are required, is this hard to fit?\u003c\/b\u003e\nThe union can be mounted anywhere, you may need to make modifications depending on where you desire the union to be situated.\n\n\u003cb\u003eIs there anything else needed for installation?\u003c\/b\u003e\nYou will need to source brake lines separately. But in terms of the union, it will arrive as shown in the product photo.\n\n\u003cb\u003eCan I install this myself? If so how long will installation take?\u003c\/b\u003e\nYes, the union is very easy to install. Simply fit the union where you desire and tighten the lines to the union referencing the OEM torque specs. Then you will need to top up the brake fluid and bleed the brake system. However, being the brake system we recommend only a trained professional to install this product.\n\n\u003cb\u003eWhat are the dimensions of the union?\u003c\/b\u003e\n55x25x17MM\n\n\u003cb\u003eWhat type of flare would this suit?\u003c\/b\u003e \nBeing a concave taper it would suit a bubble flare.","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815538987319,"sku":"4WAY-BRKE","price":58.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/20151130_133258-1_thumbnail.jpg?v=1752084321"},{"product_id":"260-10513","title":"GKTech - Wilwood Compact Remote Combination M\/C Rebuild Kit 260-10513 - 260-10513","description":"\u003cp\u003eWilwood Compact Remote Master Cylinder Rebuild kit for 260-10371 (5\/8\")\u003c\/p\u003e\nNULL","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815539511607,"sku":"260-10513","price":52.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/260-10513-lg.jpg?v=1752084328"},{"product_id":"sr20-munt","title":"GKTech - 240sx Solid motor mounts (Pair) - SR20-MUNT","description":"\u003cp\u003eThe GKTECH 240sx solid motor mounts are a direct replacement of the standard item and help reduce motor movement and get power to the ground. Particularly useful in a drift car where the car is off and on the throttle. \u003cbr\u003e\u003cbr\u003e- CNC machined aluminium \u003cbr\u003e- Fits all RWD CA18 and SR20DE\/DET's and KA24DE's (RWD ONLY) \u003cbr\u003e- Replacement part for Nissan part numbers: 1121065f11, 1122085F00, 1122065F01, 1122065F06 or Nismo part numbers 11210-RS540 and 11220-RS540 \u003cbr\u003e- Sold as a PAIR NOTE: will drastically increase NVH (NOISE). \u003cbr\u003e\u003cbr\u003eNot ideal for a daily driver or non-dedicated race car.\u003c\/p\u003e\n\u003cb\u003eWill this fit my car?\u003c\/b\u003e\nWe can only confirm fitment for the vehicles listed above under \"vehicle compatibility\". If your car is not listed there, then we don't know if it will fit.\n\n\u003cb\u003eDo you make these to suit other cars?\u003c\/b\u003e\nWe only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.\n\nHowever, we do make engine mounts in polyurethane which can be seen here: \u003ca href=\"https:\/\/us.gktech.com\/products\/ca18-sr20-polyurethane-engine-mounts\"\u003e240SX POLYURETHANE MOTOR MOUNTS (PAIR)\n\u003c\/a\u003e\n\n\u003cb\u003eWhat's the advantage of using the GKTech solid engine mounts?\u003c\/b\u003e\nSolid engine mounts keep engine and driveline movement to an absolute minimum which enables the running gear to directly get the power to the ground.\n\n\u003cb\u003eWhat modifications are required, is this hard to fit?\u003c\/b\u003e\nNo modifications are required just simply remove and refit.\n\n\u003cb\u003e Is there anything else needed for installation?\u003c\/b\u003e\nNo, the mounts come with all accessories to be fitted. They will arrive as shown in the product photo.\n\n\u003cb\u003eCan I install this myself? If so how long will installation take?\u003c\/b\u003e\nYes, it is relatively straightforward. Installation should take around 20 minutes.\n\n\u003cb\u003eWhat is the height of the engine mounts(excluding studs)?\u003c\/b\u003e\n2.55' (65mm)","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815540396343,"sku":"SR20-MUNT","price":144.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_0176.jpg?v=1752084333"},{"product_id":"145eshank","title":"GKTech - S14\/S15\/R32\/R33\/R34\/Z32 Extended +20mm ball joint shank - 145ESHANK","description":"\u003cp\u003eS14\/S15\/R32\/R33\/R34\/Z32 Extended +20mm ball joint shank\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eSold as a pair\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTS-T\",\"NISSAN R33 SKYLINE GTS-T\",\"NISSAN S14 240SX\/SILVIA\",\"NISSAN S15 SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815541084471,"sku":"145ESHANK","price":75.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/IMG_2515.jpg?v=1752084343"},{"product_id":"gtrx-5mmx","title":"GKTech - 5mm GTR\/Z32 TT - GTRX-5MMX","description":"\u003cp\u003e\u0026gt;\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTR\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN R34 SKYLINE GTR\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815541150007,"sku":"GTRX-5MMX","price":60.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6358_1_1.jpg?v=1752084347"},{"product_id":"13eshank","title":"GKTech - S13 extended +20mm ball joint shank - 13ESHANK","description":"\u003cp\u003eS13\/R32\/Z32 extended +20mm ball joint shank\u003c\/p\u003e\n[\"NISSAN S13 CA18 240SX HATCH\",\"NISSAN S13 CA18 240SX\/SILVIA\",\"NISSAN S13 SR20 240SX HATCH\",\"NISSAN S13 SR20 240SX\/SILVIA\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815541248311,"sku":"13ESHANK","price":75.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_3054_1_5bb66be0-da0a-4b54-8915-dfabc2b9259d.jpg?v=1752084351"},{"product_id":"gtrx-10mm","title":"GKTech - 10mm GTR\/Z32 TT - GTRX-10MM","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n[\"NISSAN R32 SKYLINE GTR\",\"NISSAN R33 SKYLINE GTR\",\"NISSAN R34 SKYLINE GT-T\",\"NISSAN R34 SKYLINE GTR\",\"NISSAN Z32 300ZX\"]","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815541313847,"sku":"GTRX-10MM","price":72.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6361_1_1.jpg?v=1752084355"},{"product_id":"wpb10t","title":"GKTech - Replacement WPB10T Spherical bearing - WPB10T","description":"\u003cp\u003eReplacement WPB10T Spherical bearing Used in the following GKTECH products: V1 Rear LCA's (note that some used the COM10T)\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold individually\u003c\/strong\u003e\u003c\/p\u003e\n","brand":"GKTech","offers":[{"title":"Default Title","offer_id":50815541510455,"sku":"WPB10T","price":24.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/files\/img_6489_1_1.jpg?v=1752084359"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0862\/6920\/collections\/50_9ef045a5-b363-41cb-bbe2-0627c67dc6aa.png?v=1736807445","url":"https:\/\/www.boostfactory.ca\/collections\/gktech.oembed?page=2","provider":"Boost Factory","version":"1.0","type":"link"}