Nissan Skyline GTR RB26 1000CC Bosch Injector Kit RADIUM Fuel Rail
By popular demand we have put together this simple kit of 1000CC Bosch Injectors and a Radium Engineering Fuel Rail. The injectors are supplied with pin in connectors for your factory engine harness. Due to the various different line plumbing possibilities there are NO fittings included with this kit. We have a wide range of ORB / AN fittings available for purchase separately.
Looking for a larger injector for your high powered Nissan Skyline GT-R? Up for sale is a set of six (6) NEW BOSCH EV14 - 1000cc/min fuel injectors. These are HIGH IMPEDANCE so NO resistor boxes are required.
These BOSCH EV14 injectors are compatible with all known fuels, including alcohol and E85. They offer fast response times, predictable flow down to 2ms, and maintain linear flow up to 8 BAR fuel pressure. Great for small-medium displacement engines making big power. This set can support up to 900bhp @ 90% duty(3bar FP), and over 1000bhp at 4bar.
This set is custom milled from NEW Bosch cores and flow matched to less than 2% (static & dynamic) for optimal idle, and drivability. Fuel discharge is through a single hole with a medium cone spray pattern for superior fuel atomization. These injectors are covered by our best 2yr unlimited mile warranty.
WE SUPPLY ALL OF THE NECESSARY TUNING INFO WITH THIS SET.
Direct fit Applications:
- RB26DETT R32/R33/R34 Skyline
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide Split Cone, (single orifice)
Electrical Connector: USCAR (New-style V=EV6 / Oval / LS2)
Fitted with Viton upper and lower o-rings.
Static Flow Rate @ 43.5PSI (300kPa): 95 lb/hr = 6.52g/s = 1000cc/min
Overall Length: 65.5mm
Dimensions: 48.5mm o-ring seat to seat, 53.5mm o-ring centerline to centerline