Radium Engineering Toyota Supra JZA80 Fuel/Brake Line Retainer Kit
Radium Engineering M14 Inverted Flare to 6AN Adapter Fitting - Mitsubishi Style
Vibrant M14 x 1.5 Female to -6AN Male Flare Adapter - Anodized Black
Vibrant Saddle Style Oxygen Sensor Weld Bung T304 SS (M18 x 1.5 thread) - Retail Pack of 1 pc.
Vibrant Barbed Weld On Bung for 1/2in ID Hose
Vibrant -10 AN Male Weld Bung (1-1/8in Flange OD) - Aluminum
Radium Engineering Fuel Cell Foam (12.5in X 7.0in X 4.7in)
Radium Engineering Fitting 8AN ORB to M12X1 MALE
Radium Engineering 8AN ORB to 8AN Male Fitting
Radium Engineering 8AN Inline to 1/8NPT Female Fitting
Radium Engineering Lotus Alum Weld-On Denso MAF Sensor Flange
Vibrant 4 into 1 SS Turbo Mani Collector for GT28/30/35 in Flange 48mm Pipe OD 4.5in tall 58mm out
Vibrant -10AN Push-On 90 Deg Hose End Fitting - Aluminum
Vibrant Push-On 120 Degree Hose End Elbow Fitting - -10AN
Vibrant -6AN Straight Hose End Fitting
Vibrant Bulkhead Fuel Cell Adapter -8AN Male Flare x 1/2in Barb
Vibrant Bulkhead Fuel Cell Adapter -6AN Male Flare x 5/16in Barb
Vibrant -6AN to 16mm x 1.5 Metric Straight Adapter
Vibrant -6AN to 12mm x 1.25 Metric Straight Adapter
Vibrant T304 SS Exhaust Manifold Flange for VW/Audi 1.8T motor 3/8in Thick
Vibrant 304 SS V-band Turbo Inlet Flange for PTE Medium Frame Turbo
Vibrant -6 AN SS Braided Flex Hose (5 foot roll)
Vibrant -3AN Male Banjo Fitting 8mm x 1.25 Metric Aluminum + 2 Washers
Vibrant Banjo Bolt Thread Size M10 x 1.5 Bolt Length 20mm
Vibrant -8 AN Male Weld Bung (1in Flange OD) - Mild Steel
Vibrant -6AN x -6AN x -6AN Y-Adapter Fitting - Aluminum
Vibrant Univ Oil Drain Kit incl 12in Teflon lined S.S. hose Fitting
Vibrant Univ Oil Feed Kit 3ft Teflon lined S.S. hose with two -3AN female fittings preassembled
Vibrant -6AN to M14 x 1.5 Water Jacket Adapter Fitting for Garrett BB Turbo GT28 GT30 GT35 AL
GReddy M18 Warning Oil Temp Sensor Fitting
Radium 6AN ORB w/ 10mm Barb to 6AN Male Bulkhead Fitting
Radium 6AN ORB to .313in SAE Male Fitting
Garrett V-Band Clamp 5.25in. (GTX47/GTX50/GTX55 - Gen I/Gen II)
Garrett T3/T4 Clamp (Turbine Hsg)
Stainless Bros 3in Diameter 304SS 1D Radius 45 Degree Bend No Leg Mandrel Bend
HKS X Tone Ratchet Key Chain
HKS Tone Fitting Wrench
HKS Flange W/G Mani-saide STD
Haltech CAN Adaptor Loom DTM-4 to Minifit Jr
Haltech CAN Adaptor Loom DTM-4 to JST 5-Pin
