GKTech Z33 350Z / G35 bolt on anti squat kit, 350Z-RUAB. A relocation bracket used alongside the rear knuckles to restore anti-squat on a lowered car.
- Bolt in and completely reversible; high clearance bracket that can be installed and removed without dropping the subframe
- Raises the upper arm pickup by 50mm, which increases anti-squat on a lowered car
- Constructed from high strength 4130 chromoly steel
- No subframe modification or chassis clearance work is required (unless the car is low with subframe risers)
- Optimized bump steer: the car toes in under both extension and compression for more forward bite and grip on and off throttle
- Slight reduction in camber gain and a correction to roll center; also keeps the suspension off the bump stops under acceleration
- Additional benefit with reduced rear spring rates
- Note: must be used with the GKTech rear upper camber arms (350Z-RUCA). The OEM arms will not work with this relocation bracket and would be under constant tension, leading to premature bush wear
- The kit can be used on OEM knuckles
Fitment
- Nissan Z33 350Z
- Nissan V35 Skyline (Infiniti G35)
Contact us if you are unsure of fitment or Size HERE