HFM.Parts BM57 brake master cylinder, LHD version. Part number HFM-NISS-BRK-0024-LHD.
- 27mm piston bore, suits ABS and non-ABS setups
- For a shorter, firmer pedal and less sponginess when increasing braking performance
- Made for LHD models. Can be used on RHD cars with the GKTech hard line delete kit or ABS delete kit
- Side ports; most brake lines can be bent around to reach them if your lines feed from the top or bottom
- Outlets are 10x1 thread with an ISO bubble flare (45 degree taper), or use a banjo fitting as the surfaces are machined
- The fluid sensor connector can be moved to either side: pry the lock tab apart with a small flat screwdriver between the connector and the bottom of the reservoir, then push the connector out from the opposite side. Easier to do before installation
-
Note: If you have ABS, block either the front most port (closest to the booster) or the middle port, as they are the same port split in two, with the supplied tapered grub screw.
Fitment
- Nissan Z32 300ZX
- Nissan S13 180SX (CA18)
- Nissan S13 180SX (SR20)
- Nissan S13 Silvia (CA18)
- Nissan S13 Silvia (SR20)
Contact us if you are unsure of fitment or Size HERE