Sale price $299.96 Regular price
Regular price $299.96

GKTech - High misalignment S13 240sx/S14/S15/Skyline tie rod ends (12mm/14mm) - 14mm (S14/R32/R33/R34/A31) - M145-TROD

Part Number: M145-TROD
Authorized GK Tech Dealer Ships from Calgary
Special Order From GK Tech Australia In stock at GK Tech. Order now and it goes on our next GK Tech order, placed on Nov 29th. Estimated arrival in Calgary is the week of Dec 7th - Dec 11th. support@boostfactory.ca

Warehouse Icon Inventory Location: Manufacturer Warehouse USA

Stock: 0

GKTech high misalignment outer tie rod ends, 14mm, part number M145-TROD.

  • 64 degrees of misalignment, in line with the roughly 60 degrees of OEM style tie rod ends
  • 0.98" (25mm) of built-in bump steer correction, adjusted with 0.19" (5mm) shims that are adjustable in height
  • PTFE lined 1 5/8" high misalignment heim joints (PCYML10T), with dust boots included
  • 3 shank lengths included, to suit longer lower control arms or aftermarket knuckles: standard length, +0.59" (15mm) and +1.37" (35mm)
  • Shanks have a tensile strength of 176ksi (class 12.9)
  • 14mm size, for S14, R32, R33, R34 and A31
  • If you use the GKTech 14mm extended inner tie rods, you must use the 14mm outer, even on an S13 or S15
  • With stock knuckles the tie rod thread may need to be cut down. The GKTech adjustable 14mm inner tie rods give plenty of thread either way
  • Install takes about 30 minutes. A wheel alignment is needed afterward unless the length is set perfectly
  • To check the size, measure the outside diameter of the threaded section on your inner tie rod. S13, 180SX and S15 come from the factory with 12mm

Fitment

  • Nissan 200SX / Silvia / 240SX (S14)
  • Nissan Cefiro (A31)
  • Nissan Skyline R32 GTS-T
  • Nissan Skyline R33 GTS-T
  • Nissan Skyline R34 GT
  • Nissan Skyline R34 GT-T

Contact us if you are unsure of fitment or Size HERE

Recommendations