GKTech S13 240SX/R32 Skyline Subframe Anti-Squat Reduction Weld-In Kit, part number S13X-RLCA. Weld-in brackets that relocate the rear lower control arm front pick up point for more rear grip.
- Designed from a 3D scan with CMM data. Laser cut steel brackets with step by step instructions
- Relocates the front pick up point of the rear lower control arm nearly 2 inches lower, copying the S14/S15 geometry
- Anti-squat drops from 45% to 0% for more traction on corner exit and over bumps
- Roll center is raised 20 mm for more roll stiffness. Anti-lift is reduced from 80% to 20%. Bump steer is reduced by 6 mm at 100 mm compression/rebound
- The subframe does not need to be removed, but welding is required and gluing the brackets in would not be as effective
- With adjustable traction arms, the suggested length after fitting is 225 mm, center hole to center hole
- Complies with the 2020 Formula Drift rule allowing subframe tabs within 2 inches of the original mounting position
- Note: because of the added bushing misalignment, aftermarket rear LCAs with spherical bearings, or a spherical bearing conversion of the OEM rear LCAs, are recommended
Fitment
- Nissan S13 240SX (CA18, SR20)
- Nissan S13 Silvia (CA18, SR20)
- Nissan S13 180SX (CA18, SR20)
- Nissan R32 Skyline GT-R
- Nissan R32 Skyline GTS-T
- Nissan Cefiro A31
- Nissan Laurel C33
- Nissan Z32 300ZX
Contact us if you are unsure of fitment or Size HERE