GKTech V2 Z33 350Z/G35 4130 Chromoly Super Lock Lower Control Arms, part number Z33X-FLCA. One piece front lower control arms for the Nissan 350Z, Infiniti G35 and Nissan Skyline V35.
- Replace the front lower control arm and compression rod with one piece arms that support 65+ degrees of steering lock
- One piece design does not bind at high angle and avoids the OEM 2 piece tendency to fall onto lock
- Adds 2 to 3 degrees of caster. Caster can be increased further with GKTech front upper camber arms (up to 1 degree more)
- On car adjustable in length and caster. Length adjusts from +25 mm to +50 mm over OEM
- Strut mount moved inward 30 mm so the brake caliper does not hit the strut on full lock
- Designed for the OEM knuckle, so they work with the GKTech bolt-on steering kit
- Laser cut and bent 4130 chromoly steel, CMM measured, CAD designed, FEA tested, CNC machined ends, E-coated for rust prevention
- Common size PTFE bearings: PCML12TES rose/heim joints and a COM9T coilover bearing. Dust boots included, lock stops built into the arm, adjustable link pin / roll bar settings
- Quite easy to install: remove the standard lower control arms and compression rods and the new arms bolt straight in. Mechanical knowledge recommended
- Alongside the bolt-on steering kit and rack spacers they give a large amount of lock for drifting. Also suited to circuit and grip use as the spherical bearings remove bush deflection
- Note: on low cars with the arms at their shortest length, make sure there is enough clearance between the arm and the subframe
Fitment
- Nissan 350Z (Z33)
- Infiniti G35
- Nissan Skyline V35
Contact us if you are unsure of fitment or Size HERE