GKTech Z33 350Z/G35 V3 Bolt-On Steering Angle Kit with Ackerman Adjustment, part number Z33X-SSTR. Bolt-on steering angle kit for the Nissan 350Z, Infiniti G35 and Nissan Skyline V35.
- Bolt-on kit that can be fitted and removed with no modifications, and is fully reversible even when used with GKTech Super Lock Lower Control Arms
- About 30% faster steering, suitable for dedicated drift cars and for grip or street cars that want quicker steering
- Adjustable ackerman, allowing near parallel front steering
- Around 60 degrees of lock at the lead wheel, compared with roughly 37 degrees on the OEM setup
- V3 adds ackerman adjustment over the V2, which had near zero ackerman
- Bolt-on rack spacers are recommended to get the most lock but are optional and sold separately. GKTech Super Lock Lower Control Arms are also sold separately
- Alters toe, so a wheel alignment is required after installation
- Install time is around 30 minutes. As this is a suspension component, installation by a trained professional is recommended
- Wheel fitment: the large front swaybar is the main clearance limit and some owners remove it. Low offsets (near 0 or negative) fitted best on the test cars without extended front lower control arms
- Extra lock can trigger the dash light and VDC. Bypassing or unplugging the factory yaw sensor avoids this, but check that doing so is acceptable for your intended use
- Note: set the lock stop before the caliper hits the strut on full lock
Fitment
- Nissan 350Z (Z33)
- Infiniti G35
- Nissan Skyline V35
Contact us if you are unsure of fitment or Size HERE