Link MX5Link - MX5NB2X - 239-4000
Inventory Location:
Manufacturer Warehouse USA
Stock: 0
0OUT OF STOCK
0
Link MX5NB2X Plug-In ECU (Mazda MX-5 NB2) - 239-4000
The MX5NB2X is a G4X plug-in ECU for the facelift NB MX-5, including the Mazdaspeed turbo. It mounts in the factory ECU location using the original mounts, loom and connectors, so no rewiring or adapter looms are needed, and it keeps the factory functions and includes a startup map and onboard MAP sensor.
You get Link's G4X platform, PCLink software and the full set of motorsport tuning functions.
Suits: Facelift Mazda MX-5 NB with VVT naturally aspirated engine (MY2001-2005); facelift MX-5 NB with non-VVT Mazdaspeed Turbo 1.8L. Manual transmission only.
Includes: G4X MX5NB2X plug-in ECU, anti-static strap, USB tuning cable, Link stickers, plug-in manual card, product registration card.
Specifications
- Communications: 2 x CAN bus; LTW 6-pin USB tuning connection
- CAN connector: 4-pin powered port with protected 12 V and ground, self-resetting 3 A continuous fuse
- Onboard MAP sensor
- Onboard logging: 512 MB, up to 100 kHz total logging rate
- Operating voltage: 6.5-24 V; maximum input voltage 36 V; maximum continuous current draw 11.5 A
- Dimensions: 160 x 160 x 30 mm (6.30 x 6.30 x 1.18 in)
- Weight: 270 g (9.52 oz)
- Inputs/outputs: see the MX5NB2X installation manual
Notes
- Check that your connector matches the header shown in the photos before ordering.
- E-throttle requires an expansion connector before it can be used.
- The older CANPCB cable cannot be used; connect CAN devices with the CANJST4 (101-0198).
- Not for use where it would interfere with a vehicle's safety or emission control features. Link recommends installation and setup by an official Link dealer.
You may also need
To connect CAN devices, a CANJST4 CAN cable (101-0198). Pre-facelift NB1 cars use the MX5NB1X (240-4000).
Downloads
Couldn't load pickup availability